|
1 HP Elco
Inboard Electric Boat Motors |
| |
| Motor: |
|
1 HP, 24 VDC Permanent Magnet |
| |
1.0 HP - 12.25"
long, 5" diameter, 28 pounds |
|
C - Face |
|
1750 RPM (max) |
| |
|
| Standard
Aluminum Mount: |
|
24" x 14" x 1/2" - 6061
Aluminum, 20 lbs. |
|
Note:
Pulleys, idler, belts and mounts included. Each
installation may require a custom mount. |
|
|
| Waterproof
Charger (24 VDC): |
| |
Contains two (2) 12 volt
outputs (10 amps each) |
| |
6" high x 9 1/4" wide x 3
1/4" deep; 12 pounds |
|
Note:
Charger must be mounted vertically, with indicator lights up, in a
vented space. |
| |
|
| Control Unit
with Full Range Throttle: |
| |
9" high x 7 5/8" wide x 3
1/2" deep |
| |
1/2" aluminum plate; 7
pounds |
| |
Note:
Unit needs to be mounted so the back of the plate is vented. |
|
|
| E-Meter Instrument
Panel: |
| |
3 1/4" high x 7 1/2" wide;
2 pounds |
|
Note: Space required behind
the panel is 5" deep |
|
|
| Electronic
Battery (optional): |
|
Consists of a DC-DC
converter (24 volts to 12 volts) as a battery charger and
a 33AH A.G.M. battery with wiring |
|
10" high x 8" wide x
19" long enclosure |
|
|
| Batteries, Sealed Lead
Acid, Absorbed Glass Mat: |
|
Each battery is 12 VDC |
| |
Two (2) Series 31
batteries; 68 pounds (each) |
| |
Battery dimensions: 12.97"
long x 6.74" wide x 9.88" high (each) |
| |
Other battery sizes and
combinations available |
|
Note: These batteries can be mounted on
their sides or ends. Battery size (series) is determined by range
desired. Larger or additional batteries will increase
range. |
